אַלומינום איז די מערסט פּראָסט מעטאַל עלעמענט געפֿונען אויף דער ערד, totaling about 8% פון די ערד 'ס סקאָרינקע. אָבער, aluminum as an element is reactive and therefore does not occur naturally – it needs to be refined to produce aluminum metal. די ערשטיק סטאַרטינג מאַטעריאַל פֿאַר אַלומינום רעפינינג איז באָקסייט, די וועלט 'ס הויפּט געשעפט מקור פון אַלומינום. Bauxite is a sedimentary rock, and consists mostly of the aluminium minerals gibbsite (צו די(אוי)3), באָעהמיטע (C-Alo(אוי)) און דיאַספּאָרע (אַ-Alo(אוי)), and is usually mixed with the two iron oxides goethite and hematite, the aluminium clay mineral kaolinite and small amounts of anatase (טיאָ2) and/or ilmenite (פעטיאָ3).
באָקסייט דיפּאַזאַץ זענען פאַרשפּרייטן ווערלדווייד, מערסטנס געשעעניש אין טראַפּיקאַל אָדער סובטראָפּיקאַל מקומות. Although proven reserves of bauxite are expected to last for many years, די קוואַליטעט פון די ריזערווז אַז קענען זיין עקאַנאַמיקלי געליינט איז דיקליינינג. פֿאַר רעפינערס, who are in the business of bauxite processing to make alumina, און יווענטשאַוואַלי אַלומינום מעטאַל, דאָס איז אַ אַרויסרופן מיט ביידע פינאַנציעל און ינווייראַנמענאַל ימפּלאַקיישאַנז.
The process to refine metallurgical bauxite into alumina involves the following inputs:
The following outputs are generated:
The most widely used chemical process of refining bauxite into alumina, די Bayer פּראָצעס, involves dissolving the Al2O3 out of the bauxite rock with caustic soda (נאַאָה) at elevated temperature and pressure. The Al2O3 fraction of the bauxite is dissolved into solution, to later be precipitated out as alumina. אָבער, a high-grade bauxite contains up to 60% אַל2אָ3, and many operating bauxite deposits are well below this, טייל מאָל ווי נידעריק ווי 30-40% אַל2אָ3. Because the desired product is a high purity Al2O3, די רוען אַקסיידז אין די באָקסייט (פע2אָ3, סיאָ 2, טיאָ2, Organic material) are separated from the Al2O3 and rejected as alumina refinery resides (ARR) or red mud. אין אלגעמיין, דער נידעריקער קוואַליטעט די באָקסייט (ie lower Al2O3 content) the more red mud is generated per ton of alumina product. אין צוגאב, even some Al2O3 bearing minerals, נאָוטאַבלי קאַאָליניטע, produce un-desirable side reactions during the refining process and lead to an increase in red mud generation, ווי געזונט ווי אַ אָנווער פון טייַער קאַסטיק סאָדע כעמיש, אַ גרויס בייַטעוודיק פּרייַז אין די באָקסייט רעפינינג פּראָצעס.
רויט בלאָטע אָדער ARR רעפּראַזענץ אַ גרויס און אויף-געגאנגען אַרויסרופן פֿאַר די אַלומינום אינדוסטריע. רויט בלאָטע כּולל באַטייַטיק ריזידזשואַל קאַסטיק כעמיש לעפטאָווער פֿון די רעפינינג פּראָצעס, און איז העכסט אַלקאַליין, אָפֿט מיט אַ ף פון 10 - 13. It is generated in large volumes worldwide – according to the USGS, עסטימאַטעד גלאבאלע אַלומאַנאַ פּראָדוקציע איז געווען 121 טאַנז אין 2016. This likely resulted in more than 150 מיליאָן טאָנס פון רויט בלאָטע דזשענערייטאַד בעשאַס דער זעלביקער צייַט. טראָץ אָנגאָינג פאָרשונג, רויט בלאָטע איצט האט ביסל קאמערשעל ווייאַבאַל פּאַטס צו וווילטויק שייַעך-נוצן. עס איז עסטימאַטעד אַז זייער קליין פון רויט בלאָטע איז בענעפיסיאַללי שייַעך-געניצט ווערלדווייד. Instead the red mud is pumped from the alumina refinery into storage impoundments or landfills, ווו עס איז סטאָרד און מאָניטאָרעד אין גרויס פּרייַז.
די אָנווער פון טייַער קאַסטיק סאָדע (נאַאָה) and the generation of red mud are both related to the quality of the bauxite used in the refining process. אין אלגעמיין, the lower the Al2O3 content of the bauxite, די גרעסערע די באַנד פון רויט בלאָטע אַז וועט זיין דזשענערייטאַד, as the non-Al2O3 phases are rejected as red mud. אין צוגאב, the higher the kaolinite or reactive silica content of the bauxite, די מער רויט בלאָטע וועט זיין דזשענערייטאַד. The reactive silica content not only increases the volume of red mud, but also consumes caustic soda reagent and reduces the yield of Al2O3 recovered from the bauxite. דעריבער, there is both an economic and environmental argument to be made for improving the quality of bauxite prior to refining.
די סטעט טרוקן צעשיידונג פּראָצעס Offers באָקסייט פּראָדוסערס אָדער באָקסייט רעפינערס אַ געלעגנהייט צו דורכפירן PRE-Bayer-פּראָצעס אַפּגריידינג פון באָקסייט אַרץ צו פֿאַרבעסערן די קוואַליטעט. דעם צוגאַנג האט פילע Benefits:
אין קיצער, טרוקן פּראַסעסינג מיט די סטעט סעפּאַראַטאָר Offers אַפּערטונאַטיז צו דזשענערייט ווערט פֿאַר באָקסייט פּראָדוסערס און רעפינערס. די פֿאַר-פּראַסעסינג פון באָקסייט פריערדיק צו רעפינינג וועט רעדוצירן כעמיש קאָס, נידעריקער דער באַנד פון רויט בלאָטע דזשענערייטאַד און מינאַמייז פּראָצעס ופּסעץ.
רעפֿערענצן: