Mga Pakinabang

Ang ST Equipment & Teknolohiya (STET) separator offers benefits to a wide range of industries and products. The STET separator is entirely dry, na nangangailangan ng walang tubig o mga kemikal. The separator consumes only a small amount of electrical energy, which is used to operate the belt motors. The STET separator consumes between 1-4 kWhr per ton of feed processed, depending on the density of the powder processed. The separator is easily permitted, as the only emissions control device required is a dust collector for nuisance dust. Often, there is little or no pre-processing required for feed material to the separator other than size reduction to the appropriate particle size. Unlike other electrostatic processing equipment, high temperature thermal pre-treatment is not necessary.

at saka, the separator design is relatively simple and compact. A machine designed to process up to 40 tons per hour (density dependent) is approximately 30 ft (9 m) mahaba, 5 ft (1.5 m) malawak at 9 ft (2.8 m) matangkad. Ang belt at nauugnay na mga rollers ay ang tanging gumagalaw na bahagi, making maintenance both simple and infrequent. The electrodes are stationary and are composed of a highly durable material.

The STET separator has multiple advantages including:

• Operates continuously
• Minimal maintenance
• Completely dry process, no water or chemicals
• High specific feed rate (hanggang 40 tons per hour, density dependent)
• Ease of operation
  • Rapid start-up and shut-down
  • Rapid response to feed variability
  • Amenable to automation
  • Limited operator qualification required
  • Easy to product multiple grades of products
• environment friendly
• Mababang enerhiya consumption (sa pagitan ng 1-4 kWhr per ton of feed processed)
• No wastewater treatment
• Easy to permit – single dust collector