Fly ash separation technology delivers long-term ROI by converting unsold or landfilled ash into a certified, sellable product while cutting disposal costs. STET’s dry triboelectrostatic process has processed over 25 million tons of fly ash since 1995, with ProAsh® products approved by more than 20 U.S. state highway authorities and certified under ASTM C618, CSA A3001-23, and EN 450.
Fly ash stockpiles represent a financial question mark for many power producers. Ash that doesn’t meet carbon or consistency requirements can’t be sold into the concrete market, which means it sits in storage or heads to a landfill instead of generating revenue. Fly ash separation technology exists to change that equation.
Table of Contents
How Fly Ash Beneficiation Creates a New Revenue Stream
Raw fly ash often contains variable levels of unburned carbon, which can disqualify it from use as a supplementary cementitious material. Beneficiation addresses that limitation directly.
STET’s electrostatic fly ash separation process uses a dry, triboelectrostatic method to split ash into carbon-rich and mineral-rich fractions based on particle surface charge, without process water or chemical reagents. The result is a lower-carbon ash product that can be used directly in concrete mixtures as a cementitious material, alongside a carbon-rich fraction with separate reuse potential.
Quick Fact: STET’s fly ash processing equipment has processed more than 25 million tons of material since commercial deployment began in 1995, operating at power stations across the United States, Canada, the United Kingdom, Poland, and the Republic of Korea.
What Does Dry Fly Ash Processing Save on Operating Costs?
Choosing dry fly ash processing over wet or thermal alternatives changes a beneficiation project’s cost structure in a few specific ways.
No Water, No Wastewater Stream
Because the separation step doesn’t use water, there’s no wastewater to treat and no dewatering stage to add before the product is ready for transport. That simplifies plant layout and reduces the infrastructure a producer needs to build and maintain.
Lower Air Emissions, Simpler Permitting
Unlike thermal combustion approaches used by some beneficiation methods, STET’s process is non-thermal—helping minimize air emissions and making permitting more straightforward for operators evaluating new fly ash processing equipment.
Reduced Disposal Volume
Every ton of ash that’s upgraded and sold is a ton that doesn’t require landfill space. STET’s technology has helped customers avoid more than 20 million tons of CO2 emissions, equivalent to taking 4.3 million cars off the road for a year, and has helped save over 8.5 billion gallons of water.
Is Every Fly Ash Source a Good Candidate for Separation?
Not automatically. Carbon content, moisture, particle condition, and the specifications a finished product must meet all factor into whether a given ash stream is suited to beneficiation. That’s true for both freshly generated ash and material recovered from older landfills or ponds, which may need additional preparation such as drying or screening before processing.
STET addresses this through sample testing and pilot trials before designing any plant, so producers know what a specific ash source can realistically deliver before committing capital. For more background on how beneficiated ash performs once it reaches a concrete mix, see STET’s article on the benefits of fly ash in concrete.
Key Takeaways
- Fly ash separation technology converts a disposal liability into a marketable, specification-grade product.
- STET’s dry electrostatic fly ash separation process requires no water or chemical reagents.
- ProAsh® products have been approved by more than 20 U.S. state highway authorities and certified under ASTM C618, CSA A3001-23, and EN 450.
- Not every ash source qualifies automatically; testing and preparation requirements determine project feasibility.
Frequently Asked Questions
Does fly ash beneficiation guarantee ASTM compliance?
No. Carbon reduction addresses one quality factor, but finished ash must still meet the full range of chemical and physical requirements for its intended application.
Can previously landfilled ash be processed with this technology?
Often, yes. Reclaimed ash may require drying, screening, or deagglomeration first, depending on its condition.
How much fly ash has STET’s technology processed?
Over 25 million tons since commercial deployment began in 1995.
Putting Fly Ash Separation Technology to Work
The economics of fly ash beneficiation come down to what’s in your ash and what product you want to create from it. Evaluate your fly ash with STET to find out whether dry electrostatic separation fits your operation. Contact the STET team to start the conversation.



















