Jak triboelektokrostatická separace je prospěšná pro zpracování minerálů

Mineral processing isolates valuable minerals from ore through beneficiation, which is the treatment of raw material (such as iron ore) to improve its physical or chemical properties. There are many different approaches to this process. The most common are wet and dry methods, all of which use Zařízení separační techniky.

One of the most promising developments in dry processing is triboelectric separation. This technology has a wider fine particle size range than conventional electrostatic separation technologies, making beneficiation possible in instances where flotation (a wet method) had been successful in the past.

St. zařízení & Technologie, LLC (STET) has developed a Tribo electrostatic belt separator that has given the mineral processing industry a way to beneficiate fine materials with an entirely dry technology. There are many advantages to this process, but let’s begin with some terminology.

What’s the Difference Between Wet and Dry Beneficiation?
Wet grinding, in combination with froth flotation, is the most commonly used method for reducing particle size and liberating minerals from ore. The minerals are soaked in a solution, causing the materials to separate based upon whether they are water-repelling (hydrophobic) or water-attracting (hydrophilic).

Because of the amount of water required, and the inclusion of chemical agents, froth flotation isn’t environmentally friendly. Navíc, it’s impossible to recycle all the water used, since portions of the process water are likely to contain trace amounts of chemical reagents.

Dry beneficiation separates mineral matter based on differences in its physical properties such as size, tvar, hustota, lesk, and magnetic susceptibilities. Jak název napovídá, spotřebovává méně, if any water in processing, eliminating many of the drawbacks of wet grinding.

What is an Electrostatic Separator?
Electrostatic separation is a dry processing technique that separates minerals according to their electrical conductivity or electrical charging properties. It consumes less energy than conventional wet separation, and eliminates both the need to dry out the beneficiated material and disposal issues.

What Is Triboelectricity?
Triboelectricity is a centuries-old science that dates back to experiments conducted by the ancient Greek philosopher Thales of Miletus. He discovered that rubbing amber against wool led to electrostatic charging. V důsledku toho, triboelektrický v řečtině znamená "elektřina vyplývající z tření".

Jak fungují triboelektrické náboje?
Každý elektrický náboj je kladný nebo záporný. Objekt s kladným nábojem odhání jiné kladně nabité objekty, jejich rozdělení do odlišných skupin. Naopak, kladný náboj vždy přitahuje záporný náboj, což způsobí, že se oba spojí dohromady. Nejdenně statická elektřina je triboelektrický.

Triboelektrický jev (nebo triboelektrické nabíjení) je druh kontaktní elektrifikace, při které se určité materiály nabíjejí po oddělení od jiného materiálu, se kterým navázaly kontakt. Jednoduše řečeno, třením dvou materiálů dohromady vzniká tření mezi jejich povrchy a elektřina.

Například, pokud si přes rukáv natřete plastovou zásobní vložku s perem, bude elektrifikován a bude schopen přitahovat a sbírat kousky papíru a zároveň odpuzovat jakákoli jiná pera, která mohla být také elektrifikována. Polarita a pevnost závisí na materiálech, drsnost povrchu, Teplota, kmen, a další minerální vlastnosti.

Jako druh elektrostatické separace, triboelektrická separace je užitečná při zpracování rudy, protože dokáže detekovat jemnější minerální písky než jiné metody. Bylo prokázáno, že třímotorerektomystatický pásový separátor STET účinně znehodnocuje mnoho izolačních i vodivých materiálů. Protože je schopen zpracovávat materiály s velikostí částic od 300 µm na méně než 1 µm, tato technologie výrazně rozšiřuje rozsah použitelného materiálu nad rámec běžných elektrostatických separátorů.

Proč si vybrat zařízení ST & Technologie pro vaše zařízení pro separaci suchých minerálů?
Pokud hledáte nejlepší zařízení pro separaci suchých minerálů v oboru, St. zařízení & Technologie LLC (STET) is a leader in the minerals separation industry se sídlem v Needham, Massachusetts. Our tribo-electrostatic belt separator provides a host of benefits over traditional wet processes.

Our Triboelectrostatic Separators beneficiate micron-size particles in a completely dry way. It requires no additional materials, eliminates the need for drying, and because it runs without water or chemicals, produces no wastewater or air pollutants Kontaktujte nás today for more information.